haasCONNECT Digital Controller (603010201)

• Application controller
• Standard light control on/off/dim
• Works with DALI & DALI-2 devices
• Relay control (4x)
• Digital Inputs (4x)
• Schedule driven setup
• Light scene selection
• Daylight harvesting
• Easy commissioning through the haasCONNECT PRO commissioning application
• Human Centric Lighting
• Emergency lighting management & test reporting
• DIN rail mounted
• BMS integration with sceneCOM EVO DA2 (28003778)

haasCONNECT Digital Sensor

• Low- and mid-bay sensor with DALI communication for sensing: Light / Motion / Temperature / Humidity
• Works with haasCONNECT Digital Controller 
• Powered through the DALI line
• Easy commissioning through haasCONNECT PRO iPad application
• Recessed version: 603030201, surface mounted version: 603031201

MSensor G3 PIR 4DPI WDA WH

• Low-bay sensor developed to work with the latest DALI specification
• Wide detection angle of up to 125° covering an area of up to 141 m²
• Monitoring of ambient light and occupancy detection
• Remote control interface allowing infrared remote control interaction
• Individual adjustment of the parameters with configuration software
• Power supply via DALI line
• Wide range of accessories allowing extended application range
• Small dimensions allowing easy and inconspicuous integration in luminaries
• Surface mounted version: MSensor G3 SSM 30 PIR 4DPI WDA WH (28004637)
• Recessed version: MSensor G3 SRC 30 PIR 4DPI WDA WH (28004638)

MSensor G3 SSM PIR 10DPI WH (28002879)

• Mid-bay sensor developed to work with the latest DALI specification
• Monitoring of ambient light and occupancy detection
• Surface mounted
• Remote control interface allowing infrared remote control interaction
• Individual adjustment of the parameters with configuration software
• Power supply via DALI line
• Shutter for preventing occupancy detection in one direction included
• Small dimensions allowing easy and inconspicuous integration in luminaries
• Wide range of accessories allowing extended application range

MSensor G3 PIR 16DPI WH (28002234)

• High-bay sensor developed to work with the latest DALI specification
• Monitoring of ambient light and occupancy detection
• Remote control interface allowing infrared remote control interaction
• Individual adjustment of the parameters
• Power supply via DALI line
• Mounting ring and gasket included to reach IP65 protection
• Wide range of accessories allowing extended application range
• Double terminals for through wiring

ACU Mounting Box 16DPI High-bay (28003866)

• IP65 protection box
• Mounting box for MSensor G3 SFI 30 PIR 16DPI WH sensors allowing direct mounting to the ceiling
• Easy “Click In” installation of the sensor to the top part of the box
• Casing: ABS, white (UV stabilized plastic)
• Full mounting kit with screws and dowels, allowing hassle free mounting of the box to the ceiling
• Including 2 cable glads and 2 grommets for ideal IP protection of inserted cables with a diameter of 6 – 12 mm

haasCONNECT Digital Switch Interface (603020201)

• Wired switch interface to add digital functionality to physical pushbuttons
• For up to 9 pushbuttons
• Works with haasCONNECT Digital Controller
• Powered / Communicates through digital bus
• Easy commissioning through iPad app
• Mounted behind the pushbutton (in wall)

DALI-2 Touchpanel 8P DA2 (28004782)

• Capacitive DALI-2 touchpanel with 8 freely programmable touch buttons
• Suitable for integration and in combination with DALI-2 compliant central control units 
• Multi-master compatible: Multiple control modules are possible in a DALI system
• Power supply via DALI line
• Two colour variants available: black (28004783) and white
  (28004782)

DALI PCD 1-380 one4all G3 (28004625)

• Digital leading-edge and trailing-edge phase dimmer
• Total connected load: 1 – 380 VA
• one4all input: DALI, DSI, switchDIM and corridorFUNCTION input
• Zero cross switching supported
• 1 dimmed phase (output)
• With automatic load detection
• Surface-mounted casing
• Suitable for operation with LED retrofit bulbs

KDK1…10V (85.02.000)

• DALI to 1-10V converter
• Integrates 1-10V dimmable luminaires into the DALI system
• Adjustable linear / logarithmic dimming curve
• Installation: installation box

DALI RM (24034702)

• DALI relay module
• Control of one standard contactor

DALI RM CDM 30 10A 1-ch (28003311)

• DALI-2 relay module 10A
• Compatible with DALI and DALI-2 versions
• Compliant to IEC 62386-208
• 1 channel actuator (switch) with DALI-2 input
• Protected against DALI over voltage
• Suitable for switchboard mount on standard DIN rail
• Mains rated dry-contact (volt-free) potential free relay output
• DALI device type 7

wDALI RM8 

• Wireless DALI relay module
• It is used to wirelessly control non-dimmable loads
• The set consists of a transmitter and a receiver. The transmitter is connected to the main DALI circuit, the receiver has a relay function and is powered by the mains voltage
• Transceiver range: ~300m (outdoors) and ~10-20m (indoor)
• Transmitter: 86459587-TM
• Wireless DALI relay module: 86459542

DALI 4-ch LED dimmer CV 

• 4-channel DALI LED dimmer
• Suitable for constant voltage LED-strips / LED-modules with operating voltages from 12V to 48V
• Operating Mode DT6: individual channel control via 4 DALI addresses
• Operating Mode Colour&Dim: control by 2 DALI-addresses, one for adjusting the light level and one for adjusting the colour
• SwitchDim2: 2 switch-inputs offer control of light level and colour without DALI
• Dimming range 0.1%-100%
• Adjustable PWM-frequency (122Hz/ 244Hz/ 488Hz/ 976Hz from FW version 4.6 on changed PWM frequencies: 250Hz / 500Hz / 1kHz)
• Compact types for integration in luminaires, remote ceiling and DIN rail mounting
• Type dependent max. input currents of 8A, 10A or 16A
• The maximum input current can be freely distributed between the channels (max. 10A per channel)
• Configuration via PC-software DALI- Cockpit and DALI USB-interface
• User-friendly factory default settings
• DALI 4-ch LED dimmer CV 8A (89453835) / DALI 4-ch LED dimmer CV 10A (89459560) / DALI 4-ch LED dimmer CV 16A (89453832)

DALI-2 expander

• The compact device is used to expand the DALI line
• The DALI-2 Expander is connected to the DALI line (DALI IN terminals) and behaves like a DALI ballast with a DALI address
• The devices connected to the output of the DALI-2 Expander (DALI OUT terminals) form a subordinate DALI line. The DALI operating devices in the sub-line are controlled broadcast via the address of the DALI-2 Expander. With Art. Nr. 89452937-DES, the devices in the DALI sub-line can alternatively be controlled via Switch&Dim. The DALI-2 Expander has an integrated DALI bus power supply (25mA or 200mA, depending on the device design) to supply the sub-line
• In addition to expanding the number of operating devices, the Expander can also be used to increase the cable length by 300m
• Available in 3 housing variants: for DIN Rail (89452937-HS) / remote ceiling installation (89452937-DES) / integration in luminaires as well as installation boxes (89452937-DO)

DALI Jalousie

• DALI blinds controller
• Available in 2 housing variants: for DIN Rail (86458676-HS) and remote ceiling installation (86458676-DE)

haasCONNECT PRO

• Available from App Store
• Easy Commissioning
• Offline operation
• Mobility
• Security
• Multi-controller configuration
• Individual DALI line handling
• Deployments / buildings / floors / rooms
• Schedule configuration
• Preset/lighting scene configuration
• Endpoint room/group handling
• Back-up option
• Controller replacement
• Circadian curves for Human Centric Lighting
• Emergency lighting configuration and test reports